# stinit.def for Quantum/Tandberg DLT drives

# Source <http://www.nclug.org/pipermail/nclug/2002-August/004162.html>.
{ }

# DLT4000
manufacturer="QUANTUM" model = "DLT4000" {
scsi2logical=1
can-bsr
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=0
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
# Drive is backwards compatible, use older modes (e.g. from above) as required
mode1 blocksize=0 density=0x83  # 20GB + compression
mode2 blocksize=0 density=0x82  # 20GB, no compression
mode3 blocksize=0 density=0x81  # 10GB + compression (DLT2000 mode) with DLTtape III, 15+ with DLTtape IIIXT in 2000XT
mode4 blocksize=0 density=0x80  # 10GB, no compression (DLT2000 mode) with DLTtape III, 15 with DLTtape IIIXT in 2000XT
}

# DLT7000
manufacturer="QUANTUM" model = "DLT7000" {
scsi2logical=1
can-bsr
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=0
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
# Drive is backwards compatible, use older modes (e.g. from above) as required.
mode1 blocksize=0 density=0x85  # 35GB + compression
mode2 blocksize=0 density=0x84  # 35GB, no compression
mode3 blocksize=0 density=0x83  # 20GB + compression (DLT4000 mode)
mode4 blocksize=0 density=0x82  # 20GB, no compression (DLT4000 mode)
}

# DLT8000
manufacturer="TANDBERG" model = "DLT8000" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=0
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
# Drive is backwards compatible to DLT7000, use older modes (e.g. from above) as required. Modes <10GB (<0x19) not supported!
mode1 blocksize=0 density=0x89  # 40GB + compression
mode2 blocksize=0 density=0x88  # 40GB, no compression
mode3 blocksize=0 density=0x85  # 35GB + compression (DLT7000 mode)
mode4 blocksize=0 density=0x84  # 35GB, no compression (DLT7000 mode)
}


# SDLT1
manufacturer="TANDBERG" model = "SuperDLT1" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=0
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=3600 # 1 hour
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 density=0x91 # 110 GB + compression
mode2 blocksize=0 density=0x90 # 110 GB, no compression
}

# VS160
manufacturer="QUANTUM" model = "VS160" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=0
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=3600 # 1 hour
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 density=0x98 # 80 GB, no compression
mode2 blocksize=0 density=0x99 # 160 GB, compression
}

#
# stinit.def for Tandberg SLR drives
#
# Default density code for the drives is 0x00.
# When a Default Density Code is used, the Drive will always try to use the tape format giving the largest
# capacity on a given cartridge. This is to make sure full backward compatibilities.
#
# Note that the different drive types will not be compatible with all medium types.
#
# However you can choose to use the default tape format (media) as listed below.
#

# SLR7
#
manufacturer="TANDBERG" model = "SLR7" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=1
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 compression=1 # 40 GB + compression
mode2 blocksize=0 compression=0 # 20 GB, no compression
}

# SLR24
#
manufacturer="TANDBERG" model = "SLR24" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=1
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 compression=1 # 24 GB + compression
mode2 blocksize=0 compression=0 # 12 GB, no compression
}

# SLR32
#
manufacturer="TANDBERG" model = "SLR32" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=1
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 compression=1 # 32 GB + compression
mode2 blocksize=0 compression=0 # 16 GB, no compression
}

# SLR50
#
manufacturer="TANDBERG" model = "SLR50" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=1
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 compression=1  # 50 GB + compression
mode2 blocksize=0 compression=0  # 25 GB, no compression
}

# 220LTO
#
manufacturer="TANDBERG" model = "TS200" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=1
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 compression=1 # 200 GB, native
mode2 blocksize=0 compression=0 # 100 GB, LTO
}

# 420LTO
#
manufacturer="TANDBERG" model = "TS400" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=1
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 compression=1 # 400 GB, native
mode2 blocksize=0 compression=0 # 200 GB, LTO
}

# IBM LTO 3
#
manufacturer="IBM" model = "ULTRIUM-TD3" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=1
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 compression=1 # 800 GB, native
mode2 blocksize=0 compression=0 # 400 GB, LTO
}

# SLR60
#
manufacturer="TANDBERG" model = "SLR60" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=1
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 compression=1 # 60 GB + compression
mode2 blocksize=0 compression=0 # 30 GB, no compression
}

# SLR100
#
manufacturer="TANDBERG" model = "SLR100" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=1
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 compression=1 # 100 GB + compression
mode2 blocksize=0 compression=0 # 50 GB, no compression
}

# SLR140
#
manufacturer="TANDBERG" model = "SLR140" {
scsi2logical=1
can-bsr=1
auto-lock=0
two-fms=0
drive-buffering=1
buffer-writes
read-ahead=1
async-writes=1
can-partitions=1
fast-mteom=1
#
# If your stinit supports the timeouts:
timeout=180 # 3 minutes
long-timeout=14400 # 4 hours
#
mode1 blocksize=0 compression=1 # 140 GB + compression
mode2 blocksize=0 compression=0 # 140 GB, no compression
}